Timing belt weekend: a story in three trips to the parts store
The plan was simple: belt, tensioner, done by lunch. The reality was a water pump that wept as soon as the belt came off, an idler pulley with a gritty bearing, and a crank bolt that refused to move.
Trip one: the water pump
If the pump is driven by the timing belt, replace it with the belt. Doing the job twice to save a little money is the most expensive option there is.
Trip two: the idler
Spin every pulley by hand with the belt off. Any roughness or noise means it goes in the bin. The full kit would have included it — lesson learned.
Trip three: a bigger breaker bar
The crank bolt was tightened by someone very strong a long time ago. A longer bar and a proper crank holding tool solved it without damaging anything.
Before starting the engine
Turn the engine over by hand at least two full revolutions and recheck the timing marks. If anything feels like it touches, stop and recheck. Then fill and bleed the cooling system carefully.